Quote Originally Posted by Dave Severson View Post
Couple questions first.... Is the rear end possibly overfilled, and does it have a good vent system???? The only time I've had a leakage issue with the O-Rings is when the rear end is a bit too full, or the seal was damaged during installation.... A light coating of wheel bearing grease on the outside of the bearing and O-Ring during installation is usually sufficient.
could be your o rings look at your axel housing your bearing bores could be cut or nick up clean them with some 180 grit and put new o rings in if cuts or nicks in the bores fill them with RTV just be for your put the axel back in