Thread: New build thread; 48 Plymouth
Hybrid View
-
05-28-2011 03:17 PM #1
I definitely want A/C in this but I wanted to save a few $$ and find something other than an aftermarket unit. I went scouring the boneyard today and found this; a rear air unit from a full size conversion van. It has an evaporator with the expansion valve, a heating coil, a three speed fan, and two air outlets. I think it'll work; seems to fit under the dash pretty well. I just need to find or make a grill for the front.
-
05-30-2011 12:15 PM #2
Happy Memorial Day, everyone! I hope you all got to spend time with your loved ones and working on your projects which is what I've been doing all weekend. I did some more brake line plumbing and mounted the proportioning valve and worked on the brake pedal assembly. I didn't want the GM pedal pad so I cut it off and welded on a bracket to mount the 48 pad.
Next thing was to work on the doors. I decided to go with bear claw latches and found a step by step how to on Rod & Custom's website with some good pictures.
-
05-31-2011 04:27 AM #3
I pretty much duplicated exactly how they did this in the article.
-
05-31-2011 04:31 AM #4
Once I clean up the welds it should look pretty good. The door closes nice and solid. Is anyone else having problems getting their pictures to post in the right order? Mine are getting all mixed up.
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! - -
John Norton aka johnboy