Results 1 to 10 of 10
LinkBack URL
About LinkBacksThreaded View
-
07-11-2006 10:37 PM #1
CHR Member
- Join Date
- Dec 2005
- Location
- Greencastle
- Car Year, Make, Model: 1983 Chevy K 10 Fullsize, 1978 El Camino
- Posts
- 18
Need help and suggestions. *56k beware*
I know it has been a while since my last visit here, I have had so many things going on. Most of you probably don't remember me, but that's alright.
I am building an engine test stand and have NO welder, or cutting torch yet. I need to build something that will accomodate all of my testing needs,now and in the future. I have pics of what I have so far and need anyone who has built, worked on,worked with, and uses these on a normal basis. If you have any pics Please feel free to share them I need all the ideas I can get.
All is appreciated, Thanks
Bret Hager.
Here is what I started with,
And what I have built so far with a drill and a hacksaw, My first attempt at anything like this. I have never fabricated anything out of metal before. I hope it holds.
The rest of it and my basic layout,
Last edited by Chief Smackaho; 07-12-2006 at 08:17 AM.
1983 Chevy K10 w/
1979 K10 sb 400,
3 Angle valve grind,
Comp cams pushrods,
MSD 50,000 v Coil,
Edelbrock Performer 2101,
Flowtec Headers,
Accel U-groove header plugs,8mm wires,cap and rotor,
70 psi oil pump,100 amp Alternator
1978 Chevy El Camino daily driver/restification project
350ci/TH350
View all of my cars here: http://www.cardomain.com/id/singlecherokee
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy