Originally posted by Don Meyer

I do not know what vehicle you are working on but, if you want to use a trk frame that is wider but narrower than a full size trk measure a Dodge Dakota frame...........Don
the problem there is the size of the brake rotor & its too wide also, BUT as OldSub says I may be able to use late model camaro rotor, did a little more digging & called a place called Global West and talk to one of the guys there, he told me they have a set up that'll let me run a tall spindle from a 78-96 caprice spindle on the S10 that way I get 12inch or larger rotors from a late model camaro that will kick it out about 3/4 to 1 inch and then he said to use a different offset rim to make up the rest, which I should be able to do w/o any problems. I had read something to this fact on a S10 board I belong to but never quite understood what the hell theyy were talking about untill I talked to the company....... soooooooooooo hopefull I have finally solved my problem, it'll cost me between $400 to $530 for the upper control arms but it beats doing another frame since I like the way this one is fitting............ thanks for everything....joe