Thread: Your opinion......paint suppliers!

Tweet

you can strip it many ways . you can wet sand it to keep the paper from plugging using dx 330 or lot of dish soap in the sanding bucket with water or for the 330 a spray bottle use 180 to 220 stop when your just past the soft paint. air craft stripper is one way . watch that it can eat in the glass finish coat .steel blades is a no ..no less you done it many times if you dig in you will have more work.plastic body spreaders work good for clean up with striper .you may strip it with a red 3 m pad and use enamel reducer do a small spot then wipe dry then when you get the goop off wet sand the finish out