Thread: Your opinion......paint suppliers!

Tweet

Originally Posted by 69judge

i just painted to top of a 1968 mc trailer fiberglass i used ss enamel and dxr 80 hardner. i didnt know that it need to sit mixed for 30 min. it went on great and great gloss. but when it started to dry there were dimples down in the paint. i let it dry and decided to fill in the dimples with ss paint with no hardner. i came out great but now the top coat will not dry. i was going to sand a buff and when i put the bucket of water on the side i wasnt sanding there was an indention in the paintfrom the bucket bottom. any thoughts how i can get it dry enough to redo?

you will have to strip it any paint with a harder like dxr80 in a tp coat will make it wrinkly when it drys .the hardner cross links the paint so it not just strait enamel with out the hardner not much can be done with the paint hold out is very weak top coating will not happen so strip it and recoat