Quote Originally Posted by rped1
So I should use DBC and then use DC3000 clear? What sealer after the K36 or do I not need a sealer? Is there a single stage in this same series to paint parts ( not sheet metal) I hate to base coat clear coat a master cylinder for example. All help and suggestions are greatly appreciated.
You can use the NCS sealers NCS2003 , NCS2004 or NCS 2005 , white , grey or black , depending on the top color your using .
The NCS sealers will go over the K36 primer .
DBC is compatiable over NCS sealer.

you can go here :
http://www.ppg.com/cr-refinish/phase1/frmHome.asp

And click on the Product information , then Paint lines , go to Deltron , and you can read up on the DBC , K36 ,DC clears , and the NCS sealers , just go to the left side of screen , it will have a drop down window for clears , sealers/primers , and Top Coats .
It has all the P-sheet info on all the products listed , like Mix ratios, Ideal Temps to spray the product in , Air Pressure settings for HVLP & Conventional guns , ect................
Hope this helps you on your painting adventure

SprayTech