Thread: Everybody that is currently building a car...

Tweet

Exceptional work, Dave; this is really going to be a head turner!

Yay, Dave!!!! Glad to see you posting pics again!!! The bruises will heal.....eventually!!

Now, if we can just get a shot of that "old guy playing on a jungle gym".......

Thanks for the comments guys! The bruises are getting better, however the broken bones will take a bit longer Randy!!!! As for the "old guy playing on a jungle gym" I'll have to leave that up to your imagination!

Now I'm finishing up the wiring and waiting to see if Mike wants to bring the engine up and set it in the car before I put the front sheetmetal back on....

Originally Posted by Dave Severson

Now I'm finishing up the wiring and waiting to see if Mike wants to bring the engine up and set it in the car before I put the front sheetmetal back on....

I do have that 302... and didn't you have an ol Nash 5 speed?.. HMmmm..

OOPS.. wrong Mike!

Originally Posted by 34_40

I do have that 302... and didn't you have an ol Nash 5 speed?.. HMmmm..

OOPS.. wrong Mike!

But I do have that little Bronco II body with the chopped top, a bunch of tubing on order to build a couple frames and cages......hmmmmmm--hmmmmmmmmm...

Old and devious minds seem to think alike.

Originally Posted by Dave Severson

Old and devious minds seem to think alike.

Old and devious?!?! Nope!

Em says I'm "Guilty and Shameless"

Nice work Dave. I like the color.
Kind of a green flake under the gold. Really like the custom guage mounts you fabbed and the console. One of these days when the cold starts to get to you during the winter, I have a nice warm place for you to work on an old truck with free food! Roger recently gave me a beating over not posting pictures, didn't realize he was related to Randy!

Had to go look for the software that we use, had a couple printouts in the tool box.

Here's a link to the one we use, works great!!!

RaceWORKS drag racing software

same company offers a lot of racing electronics, sure beats trying to use that blank area where my memory used to be!!!!!

I normally don't have a lot to share (but I lurk a lot!), and I seem to suck at posting pictures (either they come up as attachments or are too small), but I'll give 'er a try-

I took a week off of Work and concentrated on my Car-first, I installed a new Concept One Serpentine system (after I used Shineseal (the old Zoop's seal on it), and I chose concept One for a few reasons-they would custom make me a Crank Pulley (one that was shorter, so that I could use my Holley Dominator Crank Trigger, and, they also made a spacer behind the Pully so that I could use, say, an MSD Crank trigger in the future).

Then, I found a Machine Shop that would inlet my Crank Trigger bracket into the Concept One mount (they did a nice job)-

After thatt, I used red Scotchbrite pads and scuffed my entire Interior and then shot it with Lizardskin, and then used all of the Dynamat that I had (I re-ordered this morning for enough to finish)-I am just starting to put a few things back in, and I hope things will move faster as I mocked up the entire Interior before I tore it apart for the Lizardskin-Here are a few pictures (maybe?)-

(See Pictures below)

OK, I give up, I can't get them big enough--

I size mine at 640 X 480, seems to be a decent size for posting on here.

Originally Posted by Dave Severson

I size mine at 640 X 480, seems to be a decent size for posting on here.

Dave,

Thank you! Here is a test Photo to see how it works-

It works! (now I can infiltrate this Forum and bore all of you with my dastardly, evil Pictures!)-now, on to Photobucket to resize them all (see you in a few hours!)-

Well, Thanks to Mr. Dave here are some pictures you can actually see!

First off, here are a few of the modified Concept One Serpentine System (with custom Crank Pulley and Crank Trigger provisions)-

Here are a few of the Interior (before and now)-

Mock-up stage:



Now: