Wow. I step out for a day to change my transmission pan gasket and rear seal and there's a party going on here. Thanks for the coments, guys. Here is some background.
- I already have that Derale pan.
- I have virtually NO room under the car for anything.
- I have no heater and don't want one.
- Ideally, I need to heat the transmission fluid AND keep it at a reasonable level.
- I will be able to eventually find a location for the trans HX somewhere near the front of the car - perhaps low mounted between the radiator and the front of the engine - and maybe even some type of small scoop.

All that stuff will have to wait until I solve the A/C fitment.
Right now, I'm struggling with finding a condenser that will fit. I have one that is the right width, but is too long. (photo somewhere above) I'm looking at another that has the perfect length, but the width leaves me very little room to get 90* ells installed to route the house outside the radiator. I've made a wooden mockup and just need to get some info on a couple of fittings.

RadMock.jpg