OK, I'm gonna have to do this with words and a picture cause I don't know how to edit on her machine.
If you'll take a look at the picture below you will see the VC and the retaining bolts. I'm wanting a 4 position
T-type holder at the bolt in the upper left hand corner and then a 3 position (maybe another 4?) at the bolt
below that one in the lower left corner of the VC and then about halfway down the bottom I could use another 2 position holder and maybe a 1 position at the next bolt but probably not. Anyhow I don't mind buying several sets to accomplish this as long as they match or are compatible looking. Thanks for the reply, Em