Results 1 to 5 of 5
Threaded View
-
04-14-2009 05:32 PM #4
36 degrees before top dead center....probally can rent a dwell/tach meter from the auto parts store..You'll also need a timinig light with a dail on the back. Dial it to 36 point it at your marks and set them to zero. If none of this is possible then set the timing at idle with the vacume advance disconnected at 6 degrees befor top dead center.Last edited by HWORRELL; 04-14-2009 at 05:37 PM.





LinkBack URL
About LinkBacks
Reply With Quote
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!