Printable View
I put the water pump, alternator, and power steering pump on and fired it up. Now all I gotta do is time it. With a high lift hydraulic cam, what do you think I need to time it to? I don't know what cam is in it but it has a very noticeable ruff idle. This might be a crazy, out there question but I thought I would ask.
36 degrees at 3000 rpm.
would that be advance or retard...also i don't have a tach
36 degrees before top dead center....probally can rent a dwell/tach meter from the auto parts store..You'll also need a timinig light with a dail on the back. Dial it to 36 point it at your marks and set them to zero. If none of this is possible then set the timing at idle with the vacume advance disconnected at 6 degrees befor top dead center.
Thanks....