I worked on two things tonight: 1)repairing some notches in the frame where incorrect upper shock mounts used to be, and 2) fabbing an upper shock mount that isn't right.

I learn alot by screwing things up or rushing through a project only to realize I made a stupid mistake. The upper shock mount is just the most recent mistake, but at least I have learned from it. I learned that I will need mounts that extend farther from the upper tube and that I should mount the shocks more vertical. I can't get the washer past the tube on my first upper mount attempt. I will begin work on the next set of mounts next time I get some garage time. The pictures tell the story.

frame repair 2.JPG

frame repair 1.JPG

shock oops.JPG

shock oops 2.JPG