I haven't had much time in the garage lately but I have made some small progress.

First, I got the driveshaft shortened and got it installed. It turns out the problem was the result of human error and bad penmanship. The shop fixed it right away, no questions asked.

Second, I mounted a much stronger and better looking bracket for the steering rod support. In the picture you will see the newly installed bracket and the one I removed. The new bracket is recycled from the upper shock mounts I cut out of the frame earlier. I just didn't have much confidence in the tiny little piece of angle iron that was holding it all together before.

Next steps are to try to find some daylight hours to clean up the frame and wait for Santa to arrive. Hopefully, Mr. Kringle will be showing up with all the brake fittings, proportioning valve, and brake hoses. I will certainly be seeking some of your friendly advice as I move into the brakes.

IMG_0025.JPG

IMG_0024.JPG