Quote Originally Posted by 37 Caddy
Thanks for the quick response. I just spent about 20 minutes just walking around the "car" and staring. I am trying to figure out how to run the front brake lines. I have nothing to go on. I haven't been able to find pictures of the front brake line routing for the 71 Camaro and the brake hose tabs have long been removed. I think they mounted on the top of the frame perpendicular to the upper control arm. However, if you remember the earlier picture of the steering support you can see I don't have much room to work with once I get the brake hose to the frame.

Is there such thing as a 90 degree brake fitting with 3/8-24 on both ends?
Shouldn't be hard to find...I would suggest a steel fitting though, and not a brass one.

As for the brake hose tabs, just put them where they will work the best... Make sure the do not get pinched by or rub against any of the suspension components, not just a ride height but check to make sure the brake hose is in a safe place throughout the entire range of travel.... The clip can be mounted either above or below the frame, whichever is best for routing....and if that doesn't work, there are a number of companies making brake hose connectors that go through the frame rail....