Thread: One way to build a '32 sedan

Tweet

Don't know what the rear weight of the car is but that looks like you'd be carrying thr weight on 2 bolts ( possibly as small as 3/8) in a shear situation thru a cross member that was 1/8 to 3/16 thick????

Now, if this was a temporary crossmember for trial of the ride height/ride characteristics and you would then replace it with a more conventional cross member-----

Also---you don't need the tab or the slot to center the spring as the 2 bolts will do that anyway--and then it will be stronger without the slot---so the idea is starting to look better