Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree27Likes

Thread: 37 Ford build--IE: old Header issues thread /37 Ford/5.0/GT40P heads
          
   
   

Reply To Thread
Results 1 to 15 of 1567

Hybrid View

  1. #1
    Don Shillady's Avatar
    Don Shillady is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    Ashland
    Car Year, Make, Model: 29 fendered roadster
    Posts
    2,160

    IC2, I know moving is not much fun and you really ought to try to bring one rear and one 351 block with you for spares. I lost some stuff I wish I had back in the last move. Anyway Roanoke is closer than NY state so maybe we will eventually share a visit. I think I used the cold months well on the new book and I am coming around the bend now so maybe I can finish the wiring over the Summer. I think all I have to do yet is install the electronic speedometer, get the vacuum line on the power brake and set up the carb linkage so it is close to "almost"!

    Don Shillady
    Retired Scientist/teen rodder

  2. #2
    randyr's Avatar
    randyr is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Santa Monica
    Car Year, Make, Model: 37 Ford tudor humpback
    Posts
    1,988

    trial fit of rear seats....

     



    So, I finally got a little time to play with my car today. I started by trial fitting the rear seats I bought a while back. They are rear seats from a '05 GTO. They're the right width and I think they're going to look pretty cool and they are comfortable too. Now I need to fabricate some mounting brackets, setup the seatbelts, etc. My plan is to get front seats with integrated shoulder harnesses so I don't have to fabricate mounting plates on the door post. The '02 and newer BMW convertible has some really nice ones and the shoulder harness isn't a big, obnoxious thing like some of the other integrated harnesses. I hope to find a set in like-new condition then I'll recover the back seat to match. There is a lot of other work to do before that happens but it makes sense to plan ahead.

    Hope you guys are all doing well!!

    Randy
    Attached Images
    "It is not much good thinking of a thing unless you think it out." - H.G. Wells

  3. #3
    IC2
    IC2 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    UPSTATE New York
    Posts
    4,336

    Quote Originally Posted by randyr View Post
    So, I finally got a little time to play with my car today.


    Randy
    There really still is a Randy R from the Left Coast !!! OMG it's good to hear from you again.

    The seats look like they were made for that '37 - nice pick.

    If the Beemer seats are Recaro's - they are nice plus well built based on the ones I have. I have to say - the mounting brackets will take you some time to build. I have lots of hours doing mine - then not using those seats. Oh well, fooling with hobbies isn't supposed to be equated to hours of effort

    Here - well I'm pullin' a Randy and haven't touched my car in weeks since we played last summer and I'm catching up a deferred home maintenance plus getting ready to move to Virginia.

    Catch you later with more
    Dave W
    I am now gone from this forum for now - finally have pulled the plug

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink