Dave, here's another blurb about the Chrysler van seat I found on another site, if you still want to go that way....



I had read somewhere that a rear seat from a Chrysler Minivan will fit into a 32 Ford roadster pretty well. Can somebody tell me if I need to use the center seat or the far rear seat from one of these vans? Also, is the width of a 32 Ford pickup cab the same as that of a 32 Ford Roadster?

I am looking to start gathering pieces for an upcoming project that started life as a 32 Ford pickup.

Thanks in advance,
Kael

Middle seat . I just picked one up tuesday for my 32 roadster. Mine was from a 92 grand caravan. The back doesnt fold but it really doesnt need to. The brackets that hold it to the floor of the van unbolt and the arm reat comes off in seconds. Wiht some too, of course. They are about 40 to 41 inches wide . There was a nice article in street rodder this issue about using and reupholstering one.
I asked the same question about 2 days before I got the new mag!
You should be able to fing one for about 50 bucks.