Quote Originally Posted by IC2 View Post
Hi Randy,
Lookin' real good. IMO, changing the pedals might just be an optional way that was built into the pedal arrangement based on what you had for a chassis/brake MC setup. If it works - it's fine.

You can't imagine how much I had to heat and bend my brake pedal to work with the 'A' chasis. It doesn't look anything like the piece supplied by TCI. I was only concerned with maintaining the same ratio, ~ 6:1. I imagine TCI makes a universal pedal that fit most of their chassis and in has to be "fitted"
Hey Dave,
You may be right about the "option" though I haven't seen it out there to fit the original x-member. The main reason I started with new pedals is because I had already heated, hacked & welded the pedal that orignallly came with my bracket beyond the point of just getting a clutch pedal to match it! I learned on it so when I decided to add the clutch pedal, I thought it best to start with new pedals. There was a lot of heating & bending that went into making these pedals fit too!

I still have to figure out what I'm going to use for pedal pads. They'll have to be pretty small and I'll have to weld a mounting bracket onto the pedal arms for them.

Thanks for the input & encouragement. I always appreciate it!

Come on Spring! I want to see video of your car cruising down the street!!!

Later,
Randy