Quote Originally Posted by randyr
Hey man, thanks a bunch! I was just looking at Sandersons online last night. It's great to know it actually worked for somebody and the pic is worth a thousand words. I should have more clearance than you since my frame is a bit wider. This may be the perfect solution.
Nice looking engine! Hope mine looks as good....
All the best.
Randy
Suggestion - if you buy Sandersons, don't get their coating. I had to do a bunch of cleanup inside where they left excessive globs of weld, pieces of MIG wire still attached and a couple of too long pieces of pipe that needed grinding off. A buddy got his already coated, and he had the same crap and couldn't do anything about the problems. Mine were Jet-Hot coated AFTER I built the exhaust system and the total price of the headers still ended up about the same.
You will need gaskets as well - Sanderson says use high temp silicone which doesn't work - I ended up using Earl's:

(http://store.summitracing.com/partde...5&autoview=sku)

This is from Summit

I have more than enough clearance and a '37 will have plenty.

As far as the engine - all it takes is patience, $$$$ and some imagination. Mine is a bit beyond the photo now.