Hey you linked to my pic !, hahaha

Actually Joker51 I dumped those as they were really short and made originally for a Camaro or Chevelle and could only be mounted with the plates inboard on my frame, (outboard hits the frame), I tried relocating the plates then decided on making new ones with parts of those and some new mild steel...

I needed to get the shocks at least on the end of whatever ladder I designed or in a better location..

Everyone says that "the shocks should be as close to the tires as possible and no more than a 30-degree angle", I like the position of these out back, But may add 2 smaller ones outside the frame and in front of the air-spring plate also.. 2 more cant hurt and its not like you can see them under the car

This is what I came up with from the Camaro "whatever they were" ladders and some new steel...







Yes they are tilted, I didn't say I was DONE YET !, hahaha

Rob