Quote Originally Posted by techinspector1 View Post
Ben, I applaud your ingenuity and your skill at building one-off projects, but I don't think you understand how badly this new project is going to handle. I went through the drill when I built a full custom Independent Front Suspension system from scratch several years ago. You don't know what you don't know.

.
I do have some experience with setting up custom suspension so I am not too worried. Being that I am using stock components only narrowed, my focus is on the proper width and placement of the steering rack to minimize bump steer. My plan is run the front suspension thru its travel range once I get the two subframes clamped together prior to it installing the body for a clear view of what is going on. Any other suggestions?