I removed the front suspension today so that I could get access to the front portions of the truck. I needed to do a lot of welding, grinding and smoothing without damaging the chrome and stainless.

[IMG]20160927_114653 by Ben Modified, on Flickr[/IMG]

[IMG]20160927_172640 by Ben Modified, on Flickr[/IMG]

Also added a small bit of sheet metal to finish off the front of the cab.

[IMG]20160927_173613 by Ben Modified, on Flickr[/IMG]

[IMG]20160927_172622 by Ben Modified, on Flickr[/IMG]

While I have the brake system open, I need to remove the factory drum brake residual valves from the Wilwood brake master cylinder. I had already installed 2 lb disc brake residual valves in line for the four wheel disc brakes. Also did a lot of misc welding, fitting and grinding

http://www.BenModified.com