I am making a big push to get this truck finished up. I have it up on the lift to cross things off a long list of minor items. I am also going to pull the cab off to finish up some welding on the underside.

[IMG]20160913_172307 by Ben Modified, on Flickr[/IMG]

First on the list is sectioning out a 4" section of the under seat A/C compartment. It is deeper than I need and cuts into my ground clearance.

[IMG]20160913_172112 by Ben Modified, on Flickr[/IMG]

[IMG]20160913_172123 by Ben Modified, on Flickr[/IMG]

Also, finally getting around to finishing the bottom of the doors and moving the lower hinge up a few inches. Can't wait to trim off all that extra metal.

[IMG]20160913_172223 by Ben Modified, on Flickr[/IMG]

Here are a few shots of the underside.

[IMG]20160913_104525 by Ben Modified, on Flickr[/IMG]

[IMG]20160913_104514 by Ben Modified, on Flickr[/IMG]

While I am at it, I will check that every nut and bolt is tight.

http://www.BenModified.com