Times 4.. Awesome work right there..
Printable View
Times 4.. Awesome work right there..
Nice work. Looks good.
Questions. I'm getting ready to paint some panels soon. I'm going to use SPI epoxy also. How did it spray for you? Did you use a 1.4 tip? Gun brand? I'm also curious about your paint booth set up.
That's the kind of pic that would be tempting to take the file to a repro place and have a poster made........
Thanks guys for the kind words! It's very rewarding to finally have the frame completely done, and ready for the body.
Now to finish the body! which I hope to have done by summers end, and paint in the fall.
Rich
That chassis is looking very pretty. From experience , I know it takes heaps of work to get to that stage.
Well done!
Excellent. Some nice work. Looking forward to the next stage.
I been wondering----what are your rear coil over shocks??and are you going to run them straight vertical or tipped?????
GeorgiaDad: I'm using a cheap Vapor paint gun from Northern Tool with a 1.8 tip, and it works great! Here's a link:
Vaper HVLP Spray Gun Set with Plastic Cup — 1.8mm, Model# 19018 | Paint Spray Guns| Northern Tool + Equipment
Look at page 20 for my shop setup. I just staple cheap plastic sheeting to the ceiling to cover my tools. Wish I had
more room, but I get by. Love the SPI epoxy! Go to their web site, and click on the activity stream for some great
tips on the message board.
Mike: I think I'm booked up in February! LOL
Rich
Jerry:
I'm using Pete and Jakes Coil Overs with 250 # coils. There is no brand name on them, most likely Aldens
I would guess. I'm running them tipped at 25 deg. , have optional 20 deg mount with a different height
setting. They have adjustable valving, I set them in the middle at #6 to start with.
Rich
Here's the poor mans version of a Rotisserie! The idea was sparked by some
odd creations I have seen on the net. Here's my version.
[IMG]http://i1078.photobucket.com/albums/...psd9msgtql.jpg[/IMG]
This is the simple jig I made up to roll the body around on, and will use while the
body work is done. It bolts to 4 body mounts helping to keep the body from twisting.
I drilled, and bolted a couple 2x4's to it with 3/8" bolts. Just kind of winging it, and
figuring it out as I go.
[IMG]http://i1078.photobucket.com/albums/...ps8ukttn6z.jpg[/IMG]
I picked up a couple 4'x4' pieces of 3/4" plywood from Manards, shaped them, and
bolted them to the 2x4's. I added some stiffners between them to keep them ridgid.
Rich
Here's a view of the rear mount. I ran out of square tube or I would have welded
extensions to the body jig, and mounted the wood to the back of the body
instead of the middle. It was the weekend, and the steel supplier was closed, and
I was on a roll so I forged on.
[IMG]http://i1078.photobucket.com/albums/...psvjplmuwi.jpg[/IMG]
It worked like a charm! My two sons helped. One lifted, the other caught it, and set
it down. Was much easier than I anticipated, could have used 1/2" plywood, was
over built like I do everything. The balance point worked out great.
[IMG]http://i1078.photobucket.com/albums/...pszjkzhh2u.jpg[/IMG]
Rich
Another view from the front.
[IMG]http://i1078.photobucket.com/albums/...psvaf8ju7i.jpg[/IMG]
[IMG]http://i1078.photobucket.com/albums/...ps0zkjom7b.jpg[/IMG]
Now I can sit on my little stool, and work on it!
Rich
Very nice! I might steal your idea if I don't actually build a rotisserie for the 40.
Clever, simple, and cheap.
I like it!
You're one helluva smart cookie mate.