Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree1360Likes

Thread: Followed Me Home II
          
   
   

Reply To Thread
Page 33 of 55 FirstFirst ... 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 43 ... LastLast
Results 481 to 495 of 821
  1. #481
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    I've got the frame pretty well sanded down other than the two short round cross members - one where the ladder bars mount and the one for the tranny mount that drops out. I'm waiting for Amazon on the blast nozzle - checked TSC and they show free curbside pickup for the fine grit black diamond media at my store, so I'll likely pick up a bag next time I'm over that way.
    -
    20200731_141003 (1).jpg
    -
    As I was sanding the frame I found these four little pilot holes on each frame rail, about 3" in front of the front cross member. They were 3/32" and virtually invisible with the black paint. I had no idea what they were for, and the instructions for the IFS didn't show them used so I ended up calling Jason Slover at Pete & Jakes, knowing that he'd been around when this frame was sold back in 2009 and not wanting to weld them and then learn that they're needed. He quickly told me that they were where the brace for the front fender bolts on, and that the only other holes in that area forward of the cross member were the two on each side for the spreader bar. He offered on a highboy they should just be welded and ground smooth. Gotta love Pete & Jake's!

    It amazes me how many things the PO didn't do before he shot primer and paint on this frame! I think it was because the friend that was "helping" had a fat fender Chevy, so if he even did body off he likely just cleaned & painted, then started putting stuff back on.... The holes are gone now.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  2. #482
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    All of our lumbar yards carry lots of blasting abrasives, you may want to check them out. I used Black Diamond once, the stuff I had was way more abrasive than silica sand.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  3. #483
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    I messed around with little stuff, like taking the back hood retainer off and having to play contortionist to remove the nylock nuts while holding the phillips head bolts, so I copied Jim Robinson's good idea and put in a pair of nut-serts. Not sure why I didn't do that from the start, but it's done now and putting the clip on will be a piece of cake! Thanks for the idea, Jim!
    -
    20200804_220539.jpg
    -
    I'm not fond of sanding and it seems that I have to re-learn the process every time but I spent several hours on the firewall and finally got it into shape from all of the hacking I did to it to clear the 700R4 tranny. There's a removable hump that's held with nut-serts in the floor inside. It looks pretty good now!
    -
    20200804_220510.jpg
    -
    Got the fuel line installed with clips drilled & tapped for stainless button heads, and ordered a gallon of Herculiner bed liner to coat the bottom of the body - gravel road and shiny paint just doesn't make sense, plus it's a bit quieter. I'm about to run out of things that I wanted to get done before painting the frame & firewall....
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  4. #484
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    I hear you on not making anything too shiny underneath when you live in a gravel road ��
    Dave Severson likes this.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  5. #485
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    So I finally got the underside of the floor coated with the Herculiner Poly Bed Liner. I was telling Jim that on my coupe I was coming home one day and someone down the road was moving and had put out a king mattress for the trash man. I flipped it atop the Jeep, drove home slowly and a few days later lifted the body off of the dolly, set it at the edge of the mattress and flipped it up on it's side. I had talked to Duane at N&N and he said the body was plenty stiff, and it worked great! Super easy to mask off the frame rail area, then roll several coats of bed liner on. With the roadster I wasn't comfortable laying it over, so I was stuck rolling on the sticky, goopy, drippy bed liner laying on my back, keeping my face out from under the roller and wearing my welding cap and safety glasses. Xylene or Acetone are the solvents to remove drips, and both are pretty strong solvents. I'd forgotten how much I used on the '33 so I again bought the gallon kit, and could have done it with 2 or 3 quarts but 3 quart kits is almost the same price as the gallon, so I'll do the ATV bed or something.

    From the front, the 4 plates on the bottom have the bolts for the seats welded to them, then they're glued to the floor with body filler. Spreads the load to a larger area, and basically means the floor has to come out for seats to separate from the body. They make the underside kind of ugly, another reason for bed liner vs shiny paint.
    -
    20200808_151415.jpg
    -
    From the back, you can see that I masked a 2" strip on the outside where the floor meets the frame. Not necessary, but no added bulk.
    -
    20200808_151335.jpg
    -
    The removable tranny hump and the cover for the master cylinder access plate. This shows the texture better.
    -
    20200808_151258.jpg
    -
    The body is suspended just a bit above the dolly to dry at least over night, just for grins. I'd rather not pull chunks of bed liner off with the dolly.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  6. #486
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    I found over the years that bedliner on the bottom and even on the insides of fenders will prevent a lot of star cracks from popping up in your fiberglass pieces, too! I always thought it gave a bit of sound deadening, also. Looks good, nicely done Rog!
    rspears, 40FordDeluxe and 36 sedan like this.
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  7. #487
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    Too, too true!!
    -
    SERIOUSLY! YOU'VE HAD 5 MONTHS OF QUARANTINE!!
    FB_IMG_1598240002417.jpg
    Last edited by rspears; 08-23-2020 at 08:49 PM.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  8. #488
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    On Sunday I had everything (frame, firewall, gas tank cover, grill shell, gas tank mounting straps) ready and primed them, but by the time they were done it was 4pm and instead of shooting color and clear late into the night I decided to let it rest overnight....
    -
    20200902_170937b.jpg
    -
    Monday I woke early to the sound of showers, and then shortly after Chase & I got up, got the paper and were back inside the skies opened, things got dark again and we had a good old thunderstorm. Rain through the day, so no painting, and then Tuesday brought the threat of rain all day, with showers late in the day and fog for this morning. I waited for the fog to cook off and the temperature to come up a bit, and mid-morning went out to scuff the primer, wipe everything with wax & grease remover to clean it up, and was spraying by 10:30 or so.
    -
    20200902_170720b.jpg
    -
    20200902_170735b.jpg
    -
    20200902_170748b.jpg
    -
    20200902_170803b.jpg
    -
    Everything is blue! It's not near perfect, but it's blue and it'll do! The plan is to roll the differential & attached ladder bars into the booth, clean them up and patch any dings in the black, then clear them. I decided to leave them black as opposed to stripping them back and starting over. I like the contrast.

    Once those are cleared I can put things together for the last time, then easily mask off the frame, firewall and gas tank cover to shoot the body in place. Then wire, fire, some upholstery and go for a spin!
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  9. #489
    36 sedan's Avatar
    36 sedan is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2012
    Location
    american canyon
    Car Year, Make, Model: 36 Ford Sedan, 23 T Bucket
    Posts
    1,899

    Looks stunning to me!!! Beautiful blue!

  10. #490
    johnboy is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2005
    Location
    Tataraimaka NZ
    Car Year, Make, Model: `47 Ford sedan, A.C.Cobra replica.
    Posts
    2,630

    It looks pretty good to me too!
    Well done that man!
    johnboy
    Mountain man. (Retired.)
    Some mistakes are too much fun to be made only once.
    I don't know everything about anything, and I don't know anything about lots of things.

    '47 Ford sedan. 350 -- 350, Jaguar irs + ifs.
    '49 Morris Minor. Datsun 1500cc, 5sp manual, Marina front axle, Nissan rear axle.
    '51 Ford school bus. Chev 400 ci Vortec 5 sp manual + Gearvendors 2sp, 2000 Chev lwb dually chassis and axles.
    '64 A.C. Cobra replica. Ford 429, C6 auto, Torana ifs, Jaguar irs.

  11. #491
    rumrumm's Avatar
    rumrumm is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Macomb
    Car Year, Make, Model: '32 Ford 3W Coupe, 383 sbc
    Posts
    1,593

    What color blue did you use?


    Lynn
    '32 3W

    There's no 12 step program for stupid!

    http://photo.net/photos/Lynn%20Johanson

  12. #492
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    Quote Originally Posted by rumrumm View Post
    What color blue did you use?
    The Coatings Store's Midnight Blue Pearl.
    jerry clayton likes this.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  13. #493
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Great color choice Roger! She'll be an eye popper out in the sun!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  14. #494
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    I used a product to call the raptor liner on the bottom of Rita, it is time well spent! I love the color blue you chose, it's going to pop out in the sun!
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  15. #495
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,264
    Blog Entries
    1

    Roger, that looks very, very nice! You're getting right after it!!!!

    .
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

Reply To Thread
Page 33 of 55 FirstFirst ... 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 43 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink