Some other things I've done to the truck lately.
Raptor liner tinted with body color and clear.
https://c2.staticflickr.com/2/1932/4...605d7e6e_c.jpg
Raptor liner tinted with body no clear.
https://c2.staticflickr.com/2/1907/4...d4dc4166_c.jpg
Well once again I could not leave well enough alone. If you guys remember I never liked how the column stuck out of the firewall when I installed the 55 dash. The aftermarket mount just looked to busy and I wanted something smooth looking. So I decided to do this.
I made this piece out of sheetmetal and exhaust pipe I had laying around.
https://c2.staticflickr.com/2/1927/4...bd37f9e5_c.jpg
Mocked up to see if I liked it better before I commented to it.
https://c2.staticflickr.com/2/1957/3...73e0b5eb_c.jpg
Welded in and mocked up and yes I like it much better.
https://c2.staticflickr.com/2/1938/4...a53898a2_c.jpg
Grinded all the welds, filler, primer and almost done blocking. I will blend the paint in that area and you will never notice the difference.
https://c2.staticflickr.com/2/1915/4...6d79a4c7_c.jpg
I did not want the filler in the bed so this is what I came up with. Its a pop up motorcycle filler that I located in the fleetside stake pocket, the one the tailgate is attachked to. I had to figure out the plumbing it was some work but I like it.
https://c1.staticflickr.com/2/1947/4...f8eed42b_c.jpg
https://c2.staticflickr.com/2/1925/4...57344e98_c.jpg