Not much to post as had to come off the pain killers as they were affecting my balance and thinking but heres a bit more progress, I wanted to get the bed floor mounted which involved drilling the bed sub frame for 8mm rivnuts, most of the rivnuts could be put in with ordinary rivnut pliers but the 2 in each corner were not so easy, I mentioned this to the guy at the fastener shop and he produced a rivnut tool for tight places, It just looked like a bolt to me with a sleeve and at £22 he could keep it !!! But I did take a few pics of it before I left
It basically is a 10mm set screw with a bit on the end turned down and threaded 8mm to accept the rivnut and a sleeve, 1/2 hour later I had my own one for nothing













.