309Likes
Results 1 to 15 of 341
LinkBack URL
About LinkBacksThreaded View
-
06-05-2013 10:59 PM #11
CHR Member
- Join Date
- Mar 2009
- Location
- miami,coconut grove
- Car Year, Make, Model: 28rodster 292Y-block and HenryJ Olds V8
- Posts
- 262
Took it all back apart down to bear frame so I could box it,weld up uneeded holes,smooth and paint. My garage is a bit small and too much rain going on and still hot as &*^%,so working inside on frame with two sawhorses with a come-a-long holding it up just in case. No were to jump out of way if it falls off. Anyway with level at each end of frame so I can keep any twist out as I'm boxing this old baby. The motor mount now has a new design were center can unbolt that I made so if needed,I can remove oilpan. The level is used at each end of frame so it dose not get a twist in it as I do this boxing.Last edited by The Bat; 06-05-2013 at 11:07 PM.
Reply With Quote
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I bought the 76 in August , but haven't been able to work on it. When I get a chance I'll post some pictures.
Corvette Resurrection?