Please excuse my mess.






I got the fenders on, mouldings on the doors and fenders, and installed the fender to door seals, and fresh air assembly in the cowl. Today I'm going to get the cowl, and hood on.







Before I forget, here are the pics of the fender to door seal after I got them done.




Here's a before pic with the trash guards on the cowl.



Fender emblems. I also put new wood grain on my lower mouldings. A lot of my trim isn't perfect, but I picked the best pieces I had. I plan on repainting the black parts later as I just want to get this thing put together. :lol:



I had a friend help me put the cowl on. Boy was that fun. I'm going to have to remove it and pull two shims out of the lh fender. It has too much gap at the top. I installed a new hood to cowl seal and let me tell you, it really causes the hood to shut hard. Anyone else had that problem? I have to modify my hood latch assy now. My hood is held down with a strap for the time being.






This is where the truck is about now. So close, but so far away. Haha