Thanks.

The next step was to get started on the front nose between the headlights.
I matched the passenger side with the same piece and then made one identical to the driver's side and tacked it to the inboard side of the new passenger side piece.
I got out the chicken wire and screwed it to the front of the car so I could slide some ''Burt'' buck strips thru to create the shape.





I then tacked all the strips together to maintain the shape and added foil tape to accept the bondo for the finished buck.












I did all this to see how she looked before comitting to the shape.
I thought it looked OK so I used this buck to take patterns from to shape the new panels.