Thread: 41 Willys Gasser project

Tweet

I'm sorry Steve but I'm receiving flak about discussing your anti roll bar---

But---------you did use a right and a left handed heim joint????????????/

What welding rod do you use to weld stainless to 4130 and do you purge the inside of the tube??????????


I'm assuming that the tube is either .083 at .8129 lbs per feet or .095 at .9182 lbs per ft------------

Originally Posted by jerry clayton

I'm sorry Steve but I'm receiving flak about discussing your anti roll bar---

But---------you did use a right and a left handed heim joint????????????/

What welding rod do you use to weld stainless to 4130 and do you purge the inside of the tube??????????


I'm assuming that the tube is either .083 at .8129 lbs per feet or .095 at .9182 lbs per ft------------

Jerry its .95, I'm not welding stainless to the moly, the blades are moly too. I use A15 rod which I think is the same as your ER70 ? Yes the joints are RH & LH, wouldn't be adjustable in situ otherwise.

.