Well now the weather has improved there were a few minor jobs to do and a couple of changes to sort out, first one is I need to get stronger springs ordered as over the winter the existing ones have gone almost flat !!! I'm gonna take them to our local springsmith and get him to make a new main leaf,
http://i65.photobucket.com/albums/h2...pseqbkliaf.jpg
My new 5 point Simpson belts arrived a while ago so i fitted them in place.
http://i65.photobucket.com/albums/h2...psk8zlonf2.jpg
Another thing that bugs me is plug lead numbering so I numbered these both ends with clip on numbers, they were a job to get them over the 10mm leads !!!
http://i65.photobucket.com/albums/h2...psa0czfbgl.jpg
I've been searching for 2" roll cage padding but just couldn't find any so I got some 1 7/8" from Summit and tried it for fit, seems to be ok with zip tys.
http://i65.photobucket.com/albums/h2...psicq8bbto.jpg
http://i65.photobucket.com/albums/h2...psa7xv7asa.jpg
Something which has bugged me ever since I fitted them was the electrical plugs & sockets for the frontend, I usually use Painless as they are just so nice and work very well but when I did the job I had ran out of stock so bought some which looked indentical from Ebay, they are absolute rubbish compared to the Painless jobbies so today cut the old ones off and fitted the Painless ones, now they slot together nice & easy.
These are the rubbish ones
http://i65.photobucket.com/albums/h2...psqykiwj28.jpg
These are the good Painless ones
http://i65.photobucket.com/albums/h2...psyafnevks.jpg
.