My 26T Coupe build thread

[Whiplash23T]

Okay Bunny Steve,you can pat your self on the back and shake your hands together for such an excellent job on the motor. I too like to look at all the eye candy when one gets it home,( no not that young lady down the street Steve) the front axle looks good and can you just refresh me again, you do drive the socks off these cars you build??? How is the giving up smoking going???? I noticed that the ash tray is not as full as usual so you either was having a good day at the office or you have managed to cut back????
Can you put some photos up on the Pop too please????

[roadster32]

Whip your a funny guy I like your sense of humour.
Still smoking i'm afraid, my trusty helper Gomez has been in and emptied the ashtrays and swept the floor and generally tidyed up

Oh yes this will get driven just as hard as the rest of them, I wear my chips with pride
I find it amazing the amount of people that say to me "you won't drive it will you"
If it gets bad i will repaint or repolish but to be honest my T was pretty much as good the day i sold to what it was when i first finished it, maybe i've been lucky ???

Okay Bunny Steve,you can pat your self on the back and shake your hands together for such an excellent job on the motor. I too like to look at all the eye candy when one gets it home,( no not that young lady down the street Steve) the front axle looks good and can you just refresh me again, you do drive the socks off these cars you build??? How is the giving up smoking going???? I noticed that the ash tray is not as full as usual so you either was having a good day at the office or you have managed to cut back????
Can you put some photos up on the Pop too please????

[roadster32]

Whip there is a build thread here mate for the Thames/Fordson, have a look and let me know what you think.

http://www.nsra.org.uk/newforum/showthread.php?t=37278

Okay Bunny Steve,you can pat your self on the back and shake your hands together for such an excellent job on the motor. I too like to look at all the eye candy when one gets it home,( no not that young lady down the street Steve) the front axle looks good and can you just refresh me again, you do drive the socks off these cars you build??? How is the giving up smoking going???? I noticed that the ash tray is not as full as usual so you either was having a good day at the office or you have managed to cut back????
Can you put some photos up on the Pop too please????

[roadster32]

Well with the block all smoothed and in bare metal i needed to stop it flash rusting, this was a bit of a predicament as i couldnt give it to the reborer as it would go rusty while it was waiting to be done and if i primed it he would probaly chip or scratch it, after a bit of thinking i decided to epoxy prime it and take a chance on scratches and chips



Firstly i went around the block again and sanded off any light rust that had formed, then i washed the block down with panelwipe to degrease it, next i put it in front of my blow heater to get the block nice and warm and dry, then applied 4 coats of black epoxy primer.

It came out real nice and smooth and should be even better when its flatted for the topcoat colour.



While the gun was full i decided to do the intake manifold as well, this got 3 coats of epoxy and 3 coats of green TI hi build as well as it wasn't as smooth as the block, this will enable me to flat it out and hopefully acheive a really nice finish on it



Here's the block masked up, to get a nice edge i put the masking tape over the shaped parts and gently tapped the sharp edge with a hammer so the sharp edge cuts the tape.





















































.

[Whiplash23T]

Thanks for the link Steve for the Thames. I have read the first 3 pages and it seems our "Pommie" rodder friends complain about how high you set that damn bar also with your workmanship. Thanks again as I am going to enjoy reading each and every post on that thread as there appears to be some hardcase individuals over there in the UK that also keeps you on your toes. And yes I will let you know what I think of the project,da.

[roadster32]

Glad you like it mate.

Thanks for the link Steve for the Thames. I have read the first 3 pages and it seems our "Pommie" rodder friends complain about how high you set that damn bar also with your workmanship. Thanks again as I am going to enjoy reading each and every post on that thread as there appears to be some hardcase individuals over there in the UK that also keeps you on your toes. And yes I will let you know what I think of the project,da.

[rspears]

The engine & intake look amazing, Steve. I also saved the link to the Thames/Fordson Project and will enjoy going back to see it through, too. Your pictures and descriptions of the initial frame work are first rate - very interesting to see your explanations and approach. Thanks for taking time to post in such detail.

[roadster32]

Many thanks for the kind comments, There are obviously many different ways to do stuff and this is what works for me, glad you like it.

I post as much detail as possible as there are a lot of people trying to build rods here in england that don't have experience or know how, hopefully i can help them with tips and enthusiasm.

If i thought there were people interested i would start a thread for the build here.

The engine & intake look amazing, Steve. I also saved the link to the Thames/Fordson Project and will enjoy going back to see it through, too. Your pictures and descriptions of the initial frame work are first rate - very interesting to see your explanations and approach. Thanks for taking time to post in such detail.