Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree2Likes

Thread: 390 Oil...where is it going?
          
   
   

Reply To Thread
Page 3 of 3 FirstFirst 1 2 3
Results 31 to 42 of 42
  1. #31
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Snow white!!! Great looking car, friend of mine has one of the original 7L cars, been trying to talk him out of it for years---
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  2. #32
    Merc 006's Avatar
    Merc 006 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2011
    Location
    Harlingen
    Posts
    25

    Thanks I appreciate it. It's my baby, but I'm sure y'all know how that goes. Now that i know how to post pics I'll throw a few more up here...



    The motor when I got it...


    Interior when I got it (took out that console...don't know what it is...and added a subtle tach and gauges)


    When I tore down and repainted the motor...(that's it when I took the pan off)



    Freshened Motor


    Well I hope all these pics get up
    -1967 Ford LTD 2 door Fastback 390 C6 Ford 9 in.-

    -Mike

  3. #33
    48fordnut is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2007
    Location
    warner robins
    Posts
    194

    Your oil press is way low. Has not a thing to do with valves.Did you install a new oil pump? I would put a mechanical gaugee on it and see what the press reads then. if you only did a head job, could be worn cam bearings, mains,or rods.

  4. #34
    Merc 006's Avatar
    Merc 006 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2011
    Location
    Harlingen
    Posts
    25

    Quote Originally Posted by 48fordnut View Post
    Your oil press is way low. Has not a thing to do with valves.Did you install a new oil pump? I would put a mechanical gaugee on it and see what the press reads then. if you only did a head job, could be worn cam bearings, mains,or rods.
    Yes. I installed a new pump. I have a mechanical gauge, it'll hop right up with the tach. No, I didn't touch any bearing, it was essentially an upper-end rebuild. Ive already heard the diagnosis from several people on the pages before as well as previously providing this information. From what I've heard, I'm not too concerned, as I'm not racing for pink slips or turning 6,000+. Nevertheless, I appreciate your concern.
    -1967 Ford LTD 2 door Fastback 390 C6 Ford 9 in.-

    -Mike

  5. #35
    Big Tracks's Avatar
    Big Tracks is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    Keller
    Car Year, Make, Model: '79 Dodge Diplomat Coupe
    Posts
    832

    48fordnut?

    Hey! Is that you, Jim? I figured you fell in the well or something!

    I'm glad to see you making your presence known again. Now all is right with the world!

    Jim

  6. #36
    Merc 006's Avatar
    Merc 006 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2011
    Location
    Harlingen
    Posts
    25

    Ok, im getting tired of my car! Solo...past few days no problem, and the oil decides to chill in the pan like a good petroleum product...BUT. Today, after running it...it got hot (220 running, damn traffic), so oil psi @ 2,000 was between 35-40, no concern. Never went under 10 at idle, so nothin new...but, after checking it (After a few hours, at 140), it reads 1/2 quart low...so I started it...and looked at my plugs. Number 8 had a wee puddle of oil around it, so pulled the plug. No fouling...apparently, only a bit of "grime" around the very base...but how did I notice? It was bubbling...around the plug. So I just tightened it back up and haven't messed with it yet. I'm really fed up with this.

    The only out of them ordinary thing? When picking up my girlfriend from school, I turned the car off for about 5 minutes, when inturned it back on, a beautiful smoke plume attacked the people behind me....from my pipe...it went away and off I went. Back to question number 1...do valves need to seat, or is something blatantly wrong?
    -1967 Ford LTD 2 door Fastback 390 C6 Ford 9 in.-

    -Mike

  7. #37
    48fordnut is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2007
    Location
    warner robins
    Posts
    194

    Hi Jim, not to side track this thread, But I've been busy on OHM#3, 31 roadster. Good to hear from you. Back to business. Valves are seated by the shop. when they go on the head need to be ready to run. I still think you might be having an intake gasket problem.there could be an oil drain back problem, with the oil puddling in the head and on the intake stroke sucking oil thru the valve stem. ck your drain back holes in the ft and rear of the heads with the v/c off.
    Last edited by 48fordnut; 10-13-2011 at 03:57 PM.

  8. #38
    Merc 006's Avatar
    Merc 006 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2011
    Location
    Harlingen
    Posts
    25

    I'm gonna pull the valve covers later today. When I swapped the rockers I didn't see any obstructions, but I'd rather check that first instead of taking off the rockers/pushrods/intake just to check a gasket, but I'll do that soon if I have to...thanks for the suggestion, I know when I was doing the rockers I stuffed a shop towel down each return, but I took them out, maybe some got stuck down in there...I'll let y'all know how this goes, thanks again everybody!
    -1967 Ford LTD 2 door Fastback 390 C6 Ford 9 in.-

    -Mike

  9. #39
    R Pope is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2005
    Location
    Eston
    Posts
    2,270

    Fresh heads, old rings, and it burns oil....no surprise there!

  10. #40
    sideoiler427 is offline CHR Junior sMember Visit my Photo Gallery
    Join Date
    Mar 2016
    Location
    New Rockford
    Posts
    2

    Mike, sorry about your problem. All galley plugs installed? [10] Install a 5/16 3/4 inch long galley restriction plug beside rocker bolt. drill galley plug to 3/32. The galley that comes up from the cam bearing. Do both sides. there is some good ways to modify oil galleys, when you have a bare block. But you are past that. I drill out galley from oil filter adapter to pump to 1/2 inch. tip block upside down, 12 in. 5/16 drill bit. drill out galley from top of cam bearing to lifter galley. Just so you know.

  11. #41
    sideoiler427 is offline CHR Junior sMember Visit my Photo Gallery
    Join Date
    Mar 2016
    Location
    New Rockford
    Posts
    2

    Mike the best way to build oil pressure is new cam bearings. second, rod and main bearings. FYI On a fresh overhaul the oil pressure should be approx. 82 lbs. @ 2800 RPM.

  12. #42
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,989

    Quote Originally Posted by sideoiler427 View Post
    Mike, sorry about your problem. All galley plugs installed? [10] Install a 5/16 3/4 inch long galley restriction plug beside rocker bolt. drill galley plug to 3/32. The galley that comes up from the cam bearing. Do both sides. there is some good ways to modify oil galleys, when you have a bare block. But you are past that. I drill out galley from oil filter adapter to pump to 1/2 inch. tip block upside down, 12 in. 5/16 drill bit. drill out galley from top of cam bearing to lifter galley. Just so you know.
    Sideoiler427,
    You've responded to a thread from 2011, and Merc006 was last active 05-06-2012, 8+ years ago. Great information, but I really doubt that Merc006 will see your response.

    Welcome to the forum anyway!
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

Reply To Thread
Page 3 of 3 FirstFirst 1 2 3

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink