Thread: Timing Issue? I wish I could get this thing to stop pinging!

Tweet

What happens when you spend the extra 10 cents a gallon and buy 89 octane? Does it still ping? Gas is lousy these days and ethanol is even worse. I even run mid grade in my Honda daily because that puts it where it likes to run best.

What happens when you spring for high test?


Don

Originally Posted by Itoldyouso

What happens when you spend the extra 10 cents a gallon and buy 89 octane? Does it still ping? Gas is lousy these days and ethanol is even worse. I even run mid grade in my Honda daily because that puts it where it likes to run best.

What happens when you spring for high test?
Don

Itoldyouso: 369568

Hi People,
May I suggest that you set everything back to regulation timing etc
and use a different fuel depot for a few weeks...All the best..Skyeking

Originally Posted by Mikej

If your wanting to run 87 octane try restting the fan so you are at 160 deg. again. Also try a cooler plug

How do I determine which plug would be colder, aside from that, any suggestions on WHICH spark plug to run? (vortec head: 14mm tapered thread, 0.75" thread length)

Also how much vac. advance do you have?

As of last night I am running a total of 34* advance, 10* initial, 14* mechanical, 10* vacuum adv

Originally Posted by Itoldyouso

What happens when you spend the extra 10 cents a gallon and buy 89 octane? Does it still ping? Gas is lousy these days and ethanol is even worse... What happens when you spring for high test?

Next tank full will be high test, I will post results

Originally Posted by 53 Willys

Check your float level

Will do, just not sure who's data to follow, Carter or Edelbrock...
- Carter suggests 3/8" float level and 15/16" drop
- Edelbrock suggests 7/16" float level and 1-1/4" drop

Originally Posted by skyeking

May I suggest that you set everything back to regulation timing etc and use a different fuel depot for a few weeks...All the best..Skyeking

Sage advice, nothing wrong with re-grounding ourselves every once in a while

I have keep pretty good notes with all the tuning I am doing and every so often I revert things back to a previous point to make sure I get the same old results, so far I do and not extra parts left over either!

Thanks for replies guys!