Thread: quicksteel rather than weld?
Threaded View
-
09-08-2007 05:41 PM #4
cant you get some one to weld it or you could solder it or braze it or you can punch a hole in the pan this will roll some metal in the hole then tap with a pipe tap if you do this rigth you can get 3 threds to hang it on to then wash with thinner and use you j b putty if you have a fule pump plate on it take it drill and tap it for your return . oil when hot leaks any were i would not trust it to do all of the job . what we did was use AN bulk head fittings in the pan this is a good way to go if you do not want to weld but you have to pull the pan i would not be to hot on drilling a pan and worry about the crap/steel in the pan when done .YOU SHOULD PULL IT DO do it rightLast edited by pat mccarthy; 09-08-2007 at 05:47 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy