Thread: ZZ3 Gm crate motor
Results 1 to 6 of 6
Threaded View
-
02-17-2006 06:47 AM #5
Tell me about it. I had to buy one for the new Pontiac block a while back and there wasn't anything cheap about it. I had already had one for a '68 but with the new balancer I got, I had to use one from '69 on. Being used to buying them for chevys, I didn't think anything about it. Then I found out that you can either buy used ones off ebay or you can call around to the different Pontiac restoation companies and "Inquire". So after "inquiring", I finally found a decent used one on ebay and went that route. Many times during the build-up I have thought that I may have been better off just to go with a BBC. But I guess in the end, when I pop the hood, it'll be the correct motor sitting in there.Originally posted by thesals
at least its cheap to replace and easy to do so as well unlike my fordsSometimes NOW are the "good old days"...





LinkBack URL
About LinkBacks
Reply With Quote
This site is up more often lately, but very little traffic.
Dead!