Results 1 to 15 of 21
LinkBack URL
About LinkBacksThreaded View
-
09-13-2005 10:43 PM #12
CHR Member
- Join Date
- Aug 2003
- Posts
- 1,176
Each bank has its own lifter oil galley which is also where the head gets its oil from. If the rear galley plugs are set too deep, it will block or restrict the oil flow to every lifter, pushrod, rockerarm, and valve on that bank. If you start the engine again without doing a complete rebuild, do ensure you have oil flow to that bank. I would recommend you check the lifters. You will have to pull the intake to do this.
Are any of the valves seized in the guides?Last edited by 76GMC1500; 09-13-2005 at 10:46 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40