Results 1 to 15 of 21
Threaded View
-
09-13-2005 07:00 PM #9
Well, I did a little more exploring on the engine tonight, and have a little more info.
Five rockers are off the push rods. I found that on Cylinder 7, the Rocker itself is busted. I can imagine that was the first failure.
Two other push rods were bent. Two others had broken studs.
That leaves me wondering if one bad one can be cause for the others.
See pic attached.Thanks
Roger
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40