Thread: 72elk

Tweet

To bring you up to date, I may be going over board with the heads but more is good right? I picked up a set of vortec heads on eBay from a head shop, they are the 906 castings. Took them to a local head shop and they checked out good and are in prime original shape. I ran accros a guy on a local web site that had recently bought a house with a lot of stuff left in the garage. He advertised comp Cam b hive springs no 26915-16, retainers no 795-16 and seats no 705-16 all for $50 so of course I picked them up. I still need to get locks but don't know what I need. I've also got the Mr Gasket pin kit. I have the Eldebrock AVS thumper 650 carb and the eldebrok RPM manifold is on order. Not sure what push rods I need and with the new springs what Cam specs I should be looking at. I think I'm going to be WAY over 300 hp, but that's ok. Might as well go for 400. Any help you can give would be appreciated.