51Likes
Results 1 to 15 of 112
LinkBack URL
About LinkBacksHybrid View
-
03-11-2018 05:41 PM #1
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
If replacing just the crank, i would ask the machine shop if they have one that will magnaflux good. A cast crank will work just fine for your purposes. If you needed more than the crank, like pistons too, you might opt for a 383 kit from Scat or Eagle. Otherwise, a cast crank off craigslist will work just fine, have the machine shop magnaflux it for cracks and maybe turn it down to the next standard diameter for use with undersize bearings. They will turn 0.010", 0.020" or 0.030" undersize on the mains and/or rods.Last edited by techinspector1; 03-11-2018 at 05:46 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
time for a new forum to visit. when they sold sr.com it went down hill fast. no more forum just a cheap site selling junkie cars. the canadians killed hr.com. mods are real pricks. as with any site...
Where is everybody?