Thread: unisteer jeep tie rod end

Tweet

If both of you, Pat and XLT , want a solution. I'm sending you a PM . As I have figured out a way to get better turning radius outta Unisteer with out coin the jeep route.
Have done it on many.

Originally Posted by DA34GUY

If both of you, Pat and XLT , want a solution. I'm sending you a PM . As I have figured out a way to get better turning radius outta Unisteer with out coin the jeep route. Have done it on many.

What about others that might be interested in improving their steering performance, or simply learning about alternatives? One of the things I like about CHR is learning from the problems that one guy has, and then how they solve the problem safely.

Originally Posted by rspears

What about others that might be interested in improving their steering performance, or simply learning about alternatives? One of the things I like about CHR is learning from the problems that one guy has, and then how they solve the problem safely.

Roger if yer interested call me, (you have my #). Just a little too involved to explain on the puter as I don't puteriz very well.I'll be more than happy to help out any1 if they just send me a PM.

Originally Posted by DA34GUY

Roger if yer interested call me, (you have my #). Just a little too involved to explain on the puter as I don't puteriz very well.I'll be more than happy to help out any1 if they just send me a PM.

Don,
I don't have a need for the details, but when XLT mentioned the Jeep tie rod end it piqued my curiosity so I'd been watching the thread to see if anyone jumped in with suggestions. Maybe after XLT or Pat figure out their solution they will post how they chose to skin this cat. A lot more questions than answers out on the different forums when this comes up.

Thanks for the reply. I may give you a ring one of these days just to say "Hi" and see how things are going in OK.

I'd be interested in how this turned out. I also just picked up a 32 3 window for Mama and it has a very large turning radius.