Thread: Anyone have their MC/Booster under the dash?

Tweet

Its hard to see what I had done. Mine has more modification than what you would do because I added a clutch master. I lengthened the entire assembly for this reason. You can see where I added some flat stock across the bottom of the assembly to lengthen it. The original bracket is where you see the diagonal weld across the bottom. I also added a piece where the booster mounts (ugly) because the dodge booster had a different mounting configuration. I also used different pedals because I needed the clutch pedal you wouldnt need to do that if your running brake only, however you may need to lengthen the brake pedal. As I remember the original pedal was a little short because it is for a van. It honestly took me an afternoon to do once I had everything. I have a plasma cutter so that helps out. I uses a couple rod ends and all thread to make an adjustable connection for pedal connection. If you can pick one of these up froma junk yard, its obvious where Krugel came up with the design. Let me know if you have any other questions.