Thread: Anyone have their MC/Booster under the dash?

Tweet

No cowl vent on my car. The plan is to mount the remote resevoir(s) under the hood if it will fit. Another problem is the lip at top of firewall for the hood seal- it would have to extend far enough forward to be able to get the lid off.
I've found several- some use 2 resevoirs & I did find one that only uses one. That one uses a raised billet lid that fits over the existing dual Vette MC & seals w/ an o-ring. There's now a plenum area above the 2 resevoirs in the MC- the lid has 2 side connections- one is for the line to remote tank- the other is to a bleeder to remove all the air out of the lid. I like this one because I don't need to buy a bunch of new stuff. Down side is when you run low- you don't know which resevoir is being filled by the remote resevoir.
Big deal- I can't see in the top of MC anyway.
This would also work great for an under floor install.

Just to clarify- I have the Kugel unit in the car now. Just hard to get to top of MC to check or bleed brakes. Yea- I'm still working on the brakes- back ones now (in my limited spare time)

Again- NO FRIGGIN DIMENTIONS!!!!