Thread: oil pan gasket replacement
Threaded View
-
01-08-2011 02:25 PM #1
oil pan gasket replacement
I have a 84 tbi engine and i was wondering if I can replace the OIL PAN gaskets with the motor in the car. The leak isnt bad, it looks like the wind is pushing a little thin line of oil the length of my pan --(from front to rear)
I know for sure there is enough clearance
So my question is......(if I buy the 4 peice gasket set)
how do i get the front and rear gasket to stay in place?
Permetex should keep the pans (side gaskets) in place.
Do i just stick the U shape gaskets on the pan and push it up?
Or do I stick the front gasket in the timing chaincover and push the pan up?
Im confused
can some body give me simple instructions on how to change the oil pan gasket ****not the one peice seal****
."If it dosen't run, chrome it"
***************************************
I’ve been out of the loop on here lately and I hope everyone is doing okay. There have been a lot things going on with me and I had to put all of my extra projects on hold for a while. I’m pleased...
Been gone for a awhile, here's an...