Thread: Any Opinions on This...???

Tweet

well yes if you buy a crank it will need to be balance .what i should of said is the roatating kit that you paid for balanced crank... were alot do not get them very close this you can not check less your going to re balance the crank and if you buy pistons for 030 over bore and they need to be at 4.031 or the bore need to be 4.029 were a forged piston a bigger bore would not be the end of the world it will for a cast piston or a hyper piston. not all pistons come in at 4.030 needed bore size ?? then its back to the machine shop for a hone $$$ but if to big of bore for a smaller cast or hyper piston.as for there blocks are the best well they could of been or still are or not then what ?? they do not machine the blocks ? they buy them and may use more then one shop it all comes down to how cheap they can get them from the rebuild shop and how much money they can make on them