Wasup guys. My starter went out so I got a new one from autozone and put it
on and at first I had the small wire on the wrong screw on the silenoid and it didn`t say anything. So I unscrewed it and in the process I touched the big bolt that goes to the battery a couple times and it sparked up a little. So I disconnected the positve cable and then cont
Continued to unscrew the nut for the small wire so I can put it on the right bolt. So I did that and it crunk up on the first try but after that it won't crank it just made kind of a loud funny sound. So I checked to see if the positive wire was touching the small wire which is on the same bolt the big bolt and maybe they were touching a little to much to so I straightened that out. So I'm trying to figure out whether I burned the starter out that
Quick when it sparked up a little or could it just be a bad starter. This is my first time putting on a starter.