Thread: chev 302's back from the dead

Tweet

I have one more set of #186 fuelly heads . They are low mile heads untouched 194/150 with the front bolt holes . I bought the 4 bolt 350 block from a Corvette guy for $50 bucks . I asked him what happen to the heads . He said there in the corner of the garage . I said COOL $50 bucks more I had them . I Like fuelly heads for a under 400 HP SB Build . But I do not want to spend tons of cash building them . Last set I did I used Screw in studs that did not need the bosses cut down . And a mild pocket porting with new S/S 194in/150ex valves with a set of Z-28/LT1 springs . They were good to go went on a 355 with the XE268H Cam right around 375 HP . This is what the screw in studs look like . COOL

yep been in the hold still seat to many time the one time the numbing drops wore off and they still were digging with the grinder

Originally Posted by gassersrule_196

wow you guys cost way to much

What???? You think I'm some kind of cheap date or something??????

besides, id miss using my washers on my plugs !

.. ..........

Originally Posted by Dave Severson

What???? You think I'm some kind of cheap date or something??????

iron eagles bare 596.95 unassembled 789.95 platinum unassembled 740. still not bad

well i can make payments to the guy who does mine and he does all you mention plus alot more so i am very happy. and he doesnt use china crap

Originally Posted by gassersrule_196

well i can make payments to the guy who does mine and he does all you mention plus alot more so i am very happy. and he doesnt use china crap

ask him were he get his valves from or valve springs i would bet you do not know were it made ?? but i do and i think erik would know were all most all of it comes from

Originally Posted by pat mccarthy

iron eagles bare 596.95 unassembled 789.95 platinum unassembled 740. still not bad

Or the world S/R Torquers 67cc 170cc intake runners 202/160 $570.00 bare /pair

Originally Posted by pat mccarthy

ask him were he get his valves from or valve springs

the valves come from italy/france/germany <feaerra/martin wells> he wont use valves from china he notes the steel isnt as good.

Originally Posted by gassersrule_196

the valves come from italy/france/germany <feaerra/martin wells> he wont use valves from china he notes the steel isnt as good.

not made in the USA

did i say usa? i said he does not use JAP SHIT end of story damn it im not fighting with you or erik anymore i am done. ive got way to many things going on right now to be doing this. no disrespect to you i just cant do this anymore.

Originally Posted by gassersrule_196

did i say usa? i said he does not use JAP SHIT end of story damn it im not fighting with you or erik anymore i am done. ive got way to many things going on right now to be doing this. no disrespect to you i just cant do this anymore.

jap shit is not china shit get your shit strait
whos fighting????

Originally Posted by gassersrule_196

maybe im not making myself clear, i dont like to sell the country out there i said it

ok i give up

oh screw you guys. im so sick of this chicken sh&t drama that goes on here just like mooneye777 said, screw it. if somebody in the us made that stuff id buy it from them but i will never give my money to asia.