Quote Originally Posted by DaLowRyda
Like the title says i am looking for a piston that is easily capable of handling atleast 500hp at 6500rpm without going broke in my checking account...LoL! I am also looking for something either in the Flat top or Domed sort to keep the CR as high as possible. and also please share your opinion on what I need for the application hyper or forged and the price of what in your opinion is the best bang for the buck in both metals. and also if you have a moment after all this to maybe give me "estimated" HP for the engine. Thanks for reading this guys and now to the good stuff!!!!!


heres what i got going on so far:
sbc 350 +40 decked to 9.000"
Scat Pro Comp Lightend Cast Steel crank 9-350-3480-5700
Scat 4340 6" Lightweight Rod 2-icr6000p
Comp Cams XE 284-296 dur 507-510 lift w/hyd lifters CL12-250-3
Comp Cams Magnum Pushrods
Crane Cams Energizer Roller Rockers
Edlebrock Performer RPM 70cc Aluminum Fully Assembled Heads
Edlebrock Victor Jr. Intake
800 Holley Carb
I like the SRP pistons.
Please keep in mind cheap and good don't always go together.
I don't know what your cam specs. are at .050 but I would guess that 800 cfm is to large on carb size.